Find Your Machine
Send a Message

I’m Most Interested In *

Container Type

Equipment Type

Target Fill Speed

Target Fill Size

Target Accurcy

inside banner

Precautions for the use of paddle mixer


Precautions for the use of paddle mixer

Aug Mon,2021
Precautions for the use of paddle mixer
1. The mixer should be set in a flat position, and the front and rear axles should be cushioned with square wood, so that the tires should be elevated to avoid moving when starting.
2. The mixer should be implemented with secondary leakage protection. After the power is turned on before going to work, it must be carefully inspected, and it can be used only after the empty vehicle is deemed qualified. During the trial run, check whether the speed of the mixing drum is appropriate. In general, the speed of the empty car is slightly higher than that of the heavy car (after loading).
2~3 turns faster, if the difference is large, the ratio of the driving wheel and the driving wheel should be adjusted.
3. The rotation direction of the mixing drum should be in accordance with the direction indicated by the arrow. If it is not true, the motor wiring should be corrected.
4. Check whether the transmission clutch and brake are flexible and reliable, whether the wire rope is damaged, whether the track pulley is in good condition, whether there are obstacles around and the lubrication of various parts, etc.
5. After starting up, always pay attention to the normal operation of the various parts of the mixer. When shutting down, always check whether the blades of the mixer are bent and whether the screws are knocked off or loose.
6. When the concrete is mixed or is expected to stop for more than 1 hour, in addition to discharging the remaining material, pour stones and water into the shaking drum, turn on the machine, and rinse the mortar stuck on the drum and discharge all of it. There should be no water in the barrel to avoid rusting of the barrel and blades. At the same time, the dust accumulated outside the mixing drum should be cleaned up to keep the machinery clean and intact.
7. After get off work and when the machine is not in use, the switch should be turned off and the switch box should be locked to ensure safety.
Precautions for the use of paddle mixer you can browse related products and initiate consultations on our website.