Find Your Machine
Send a Message

I’m Most Interested In *

Container Type

Equipment Type

Target Fill Speed

Target Fill Size

Target Accurcy

inside banner

How to properly maintain the powder packaging machine


How to properly maintain the powder packaging machine

Nov Thu,2021
How to properly maintain the powder packaging machine
Powder packaging machine is a very common machine, but many people don't know how to properly maintain this kind of machine. Let me introduce you to the correct maintenance method of powder packaging machine.

1. Lubrication work. It is necessary to regularly add oil to its gear meshes, the oil hole of the bearing with a seat, and the moving parts. It is strictly forbidden to run the reducer without oil once every shift. When adding lubricating oil, be careful not to put the oil tank on the rotating belt to prevent slipping and loss of rotation or premature aging of the belt and damage.  

2. Cleaning work. After the equipment is shut down, the metering part should be cleaned in time, and the heat sealer body should be cleaned frequently to ensure that the sealing lines of the packaged product are clear. The scattered materials should be cleaned up in time to facilitate the cleanness of the machine parts, so as to better extend it. The service life, and at the same time, the dust in the electric control box should be cleaned frequently to prevent electrical faults such as short circuit or poor contact.  

 3. Maintenance work. Before using the powder packaging machine, check the screws at all parts, and there must be no looseness, otherwise, it will affect the normal long-distance rotation of the whole machine. For the electrical parts, pay attention to waterproof, moisture-proof, anti-corrosion and rat-proof work. In order to ensure that the inside of the electric control box and the connection terminals are clean to prevent electrical failures, after the shutdown, the two heat sealers should be in the open position to prevent the packaging materials from being scalded.