Find Your Machine
Send a message

I’m Most Interested In *

Container Type

Equipment Type

Target Fill Speed

Target Fill Size

Target Accurcy

inside banner

Do you know how the automatic bulk bag filling machine operates?

The fully automatic bulk bag filling machine adopts touch-sensitive man-machine interface and Chinese display. As long as you follow the displayed instructions, you can easily operate without any

Do you know how the automatic bulk bag filling machine operates?

Jan Thu,1970 Do you know how the automatic bulk bag filling machine operates?


The fully automatic bulk bag filling machine adopts touch-sensitive man-machine interface and Chinese display. As long as you follow the displayed instructions, you can easily operate without any experience, which can greatly reduce training time, set the production speed arbitrarily and automatically adjust the production speed. It can be used with any production line to achieve effective production operations.

1. Before starting the automatic bulk bag filling machine, please check the disinfection level; check whether the power supply and air pressure are normal; check whether the solenoid valve and cylinder are intact; whether the action is normal; whether the direction of the water pump is correct; whether the air is discharged. If an abnormal situation is found, production can be carried out after troubleshooting.

2. The fully automatic bulk bag filling machine can automatically clean, disinfect, fill, cover and cover during the production process without human interference. However, the operator should pay close attention to the status of each part and switch the automatic mode to manual mode in time to prevent accidents. When the chain position is not correct, please manually push out the spindle, and then push the chain to the normal position. During work, disinfectant should be added in time to prevent the pump from idling and burning the seal without water. After the automatic bulk bag filling machine is produced, the residual liquid in the pipeline should be drained, the gas path and water source should be cut off, and the power supply should be turned off.